Chilean Carmenere 2022

>> Tuesday, March 01, 2022

As I mentioned in the previous post, I've been busy since...I think December, working on some remodeling projects. This wasn't just a simple paint refresh.  We ended up taking out a bar and putting in a new one.  I moved a bunch of electrical, added new lighting, moved drain lines, etc. Our kitchen cabinets were long overdue for replacement and dogs and kids had taken a toll on our flooring, so all that was torn out as well. Long story short, lots of trips to the dump spread over lots of weekends. 


We're kind of at the end of all the destructive work and moving on to putting things back together. New flooring is going in this weekend (pretty much the only thing I'm paying someone to do for me) and I'll start installing new cabinets and appliances shortly after that. I feel like we can see the light at the end of the tunnel.

Anyway, the point of my long-winded intro is to point out the probably obvious fact that I haven't had a chance to brew in a long time. Because the time commitment is so much less and because my wife likes wine, I'm about to start on my second batch of wine, a Chilean Carmenere.

This is another Wine Expert kit. For this one, I'm using the yeast supplied with the kit (EC-1118) and per my usual beer brewing process, I'm making a yeast starter to help ensure a healthy fermentation. For the yeast starter, I'm using 1 quart of Knudsen Concord Grape because it's 100% juice and it's preservative free. To this I added 1/2t of Fermax Yeast Nutrient and 4t of granulated table sugar. This was boiled to sanitize then allowed to cool overnight before pitching yeast. I'll let this go for a day or two before pitching.  



Update 3/3/2022
The krausen on the yeast starter (is it called krausen when making wine?) looked like it was starting to drop a little bit, so I decided to proceed today. I'm doing primary for this one in my SS Brew Bucket. Here's the process I followed today:
  1. I added 8 cups of hot water then bentonite to the fermenter and stirred well. I used RO water for this part and ask other water additions.
  2. I added the concentrated must from the kit then topped up to the 5.5 gallon mark. The instructions call for topping to 6 gallons, but I felt comfortable going to 5.5 since I'll be adding my yeast starter, and I suspect the bucket cone will do a good job containing sediment.
  3. Next, I added the granulated oak.  
  4. Lastly, I took a gravity reading: 21.3 (1.086).  I should end up with a wine around 12.1% ABV.
  5. I pitched the yeast and am fermenting at 63F.
Stay tuned for more updates.

Read more...