American Wild Barrel-Aged Brown

>> Sunday, November 08, 2015

Today I'm brewing the first in my barrel-aged sours using my recently acquired whiskey barrel. The RIS that's currently in the barrel is progressing nicely, so I wanted to get going on this one so that it's ready when we bottle the RIS.

This beer is based on The Rare Barrel Bruin base recipe. This will primary with the INISBC-913 Brett Barrel III then I'll secondary in the barrel with my Roeselare-based sour blend. Here's the recipe as I brewed it today. This is for a 10 gallon batch:

15.75# Weyermann Pilsner
2.0# 11oz Rahr White Wheat Malt
13 oz Crisp Crystal 60
13 oz Briess Chocolate 350L
13 oz Flaked Oats
13 oz Special Aromatic
13 oz Spelt Malt
3 oz Carafa III
1 oz Aged Hops (60 mins)
INISBC-913 Brett Barrel III
Yeast Nutrient

Mash at 154F for 60 mins, 90 min boil, ferment at room temp.
Note: I decided to go with a 154F mash even though I'm doing a 100% brett primary. This is because the brett I'm using has a reputation for fermenting very dry, so I'm trying to ensure there's a fair amount of complex sugars in this beer.

Brewing Notes
No issues to speak of. OG came in at 1.063 (15.6). I was going to use Whirlfloc, but spaced it off. It shouldn't matter too much as this beer will age for a while.

Update 11/10/2015
This yeast is voracious. I woke up yesterday morning to very active fermentations. Both fermenters had a couple inches of krausen and very active airlocks. I considered hooking up blow-off hoses but there seemed to be plenty of headspace so I skipped it and went to work. About an hour later I got a text from my son that read , "It's exploding" and a picture showing krausen pushing up through one of the airlocks. I ran home for lunch and hooked up blow-off tubes, and it was just in the nick of time as one of the fermenters had started building up pressure. Crises averted, but I'll remember to use a blow-off from the beginning the next time I use this yeast.

Updated 12/6/2015
This beer went into the barrel today. I forgot to pick up a pack of Roeselare, so I'll have to pick one up and pitch it tomorrow.

Updated 12/6/2015
I pitched a very fresh Roeselare pack tonight, manufacture date of 11/22/2015.

Update 5/14/2016
I pulled a sample yesterday and this beer has soured much faster than I expected. IMO, it's about ready to go now. pH on this beer is down around 3.18, but it doesn't seem like it should be that low. I'm trying to decide if I'll turn this into a solera by racking off a portion, then refilling with a fresh beer.

Read more...

Hibiscus Sour on Oak

>> Friday, October 02, 2015

Today I'm doing a rare evening brew session. I don't do too many of these because it usually results in cleaning pots at midnight...something that isn't real high on my list of favorite things to do. I'm excited to get started on this beer though, so I'm just going,with it.

I'm starting the first of several experimental sour beers based on the well-publicized grain bills used by The Rare Barrel. The Rare Barrel essentially has three different base beers, a golden, a red, and a bruin (brown). They'll take these base beers and age them in different barrels and/or add adjuncts in secondary to end up with a variety of beers. If you google Rare Barrel Base Recipes, it's pretty easy to find them. Additionally, Jay Goodwin has freely provided info on several episodes of The BN's Sour Hour. The grain bills cited below were found on the Milk the Funk Wiki:

Golden Recipe

12° Plato (1.048 SG)
70% Base Malt (any type; probably Belgian Pilsner)
12% Malted Wheat
6% Rolled Oats
6% Spelt Malt (substitute wheat if you can't procure spelt)
6% Special Aromatic (specifically Franco-Belges; substitute with Vienna or Light Munich)
 Red Recipe
14° Plato (1.057 SG)
70% Base Malt (any type; probably Belgian Pilsner)
12% Malted Wheat
4.5% Rolled Oats
4.5% Spelt Malt (substitute wheat if you can't procure spelt)
4.5% Special Aromatic (specifically Franco-Belges; substitute with Vienna or Light Munich)
4.5% Crystal 60
Use de-husked black (Carafa II or III) to adjust color to you liking; ~1%
 Bruin Recipe
16° Plato (1.065 SG)
70% Base Malt (any type; probably Belgian Pilsner)
12% Malted Wheat
3.6% Rolled Oats
3.6% Spelt Malt (substitute wheat if you can't procure spelt)
3.6% Special Aromatic (specifically Franco-Belges; substitute with Vienna or Light Munich)
3.6% Crystal 60
3.6% Chocolate
Use de-husked black (Carafa II or III) to adjust color to you liking; ~1%
The beer I'm making today is based on the Golden Recipe above. I will be adding dried hibiscus flowers after fermentation. I've never used hibiscus before but they're said to give a slight tart berry-like character and tons of deep red color to a beer. For yeast, I'm going with a clean primary followed by dregs cultured from Jester King's Petite Prince. SO-4 should leave some sugars behind for whatever is in the JK dregs.

A note on the malts, it may be hard to find Spelt and Special Aromatic. Spelt is an heirloom wheat variety. Special Aromatic is said to be different than both Special B and Aromatic malt. I had to special order both from the guys at Salt City, but you could make substitutions as noted above. Here's the recipe as I made it:

5.75 # Weyermann Pilsner
1.00 # Weyermann Malted Wheat
0.50 # Rolled Oats
0.50 # Best Malz Spelt Malt
0.50 # Franco-Belges Special Aromatic
1-2 handfuls of rice hulls
7g U.S. Goldings (60 min)
7g Aged Hops (60 min)
Safale S-04 (Primary)
Jester King Petite Prince (Secondary)
3.0 oz Dried Hibiscus Flowers (Secondary) - TBD, either dry hopped or made into a tea
French oak, Medium+ toast for aging

Mash at 150F, 90 minute boil, primary ferment at 65F, secondary at room temp

Update 10/7/2015
Primary fermentation seems to have wrapped up and the yeast have dropped out for the most part. I tasted a sample from the Petite Prince dregs starter and it tastes amazing. I'll probably let this go until the weekend then rack to secondary and pitch the dregs.

Update 10/9/2015
I racked to secondary tonight and pitched the JK dregs.

Update 10/27/2015
Pulled a sample tonight. Aroma is pretty clean, not much funk yet. There's a subtle tartness starting to develop but at this point I'd call it tangy rather than tart or sour. I didn't bother taking a pH reading yet. I think this beer is headed in the right direction but it's probably going to take a while to mature. I'll have to monitor the sourness and make sure it's progressing. Worst case, I'll drop in some of my house sour blend...I think it's capable of souring anything. If you brew this beer, please take note of Jerad's comment below:
I contacted Jay Goodwin a while back and he mentioned that with these grain bills, they mash at 148 when doing 100% brett primaries and 155 with sacc in primary followed by brett in secondary.
Update 11/13/2015
Checked the pH today and it's down to 3.41. Sourness is much more noticeable than when I tried it on 10/27.

Update 4/7/2016
I moved this beer from a 6 gallon carboy to a 5 gallon carboy today. I racked the beer onto 1 pound of Simplicity Belgian Candi Syrup and two partially charred medium+ French oak cubes. I wasn't originally planning on using the candi syrup, but I wasn't satisfied with the tartness I was getting out of the Petite Prince dregs. I'm hoping a little food will help drop the pH a bit more. The beer definitely smells acidic, but the flavor is too mellow for my liking.

Update 6/25/2016
I bottled this beer last night. For the hibiscus, I put the 3oz of hibiscus in a French press, then added about three cups of hot water. This went into the fridge and was left to "brew" for about 24 hours. Midway through, I gently stirred it. The tea was then added to the bottling bucket along with the priming sugar and the beer was racked on top. Appearance-wise, this beer is a nice pinkish red and has really good clarity at room temp. That may change once it's conditioned and chilled. It is tart, but it's not as intense as many of my sours. It's along the lines of lemonade and the hibiscus have added a nice berry character. I didn't take a pH reading at bottling, but I suspect it's in the 3.5-3.6 range. I'm definitely looking forward to trying this when it's fully conditioned, but it was good enough that I finished the last 8 ounces that was leftover in the bottling bucket.

Read more...

Whiskey Barrel Russian Imperial Stout (aka Queen Jennie's Revenge)

>> Sunday, September 20, 2015

As mentioned in my previous post, I recently acquired a 10 gallon oak whiskey barrel. I wanted to brew something that would be able to stand up to the strong flavors of a freshly emptied whiskey barrel. I decided a RIS would be a good candidate. I've been wanting to brew a RIS this past year,but was never able to fit it into my brew schedule. This is going to be a big beer and it would take me years to go through 10 gallons of it, so I asked a couple buddies of mine if they'd be interested in splitting a batch. Fortunately they said yes.


This recipe is based on the 2015 NHC gold medal winning recipe from William Steimle, Dylan Vaughan, and Craig Vilhauer. Our batch will be a 10 gallon batch and will have to be split into two separate mashes. We'll then recombine for a single boil. The recipe as we brewed it is:

16.0# Crisp Maris Otter
11.0 # Fawcett Pearl Malt
2.31 # Crisp Roasted Barley
1.50 # Briess Golden Light DME
1.44 # Simpsons Double Roasted Crystal
0.63 # Crisp Chocolate Malt
0.63 # Crisp Pale Chocolate Malt
71g Warrior (60 min)
85g US Golding (10 min)
85g US Golding (0 min)
Yeast Nutrient
Whirlfloc
3 packets US-05

Mash at 152F, 90 minute boil, ferment at 63F then raise to 68F over a few days. After primary is complete, cold-crash to ensure as much yeast has dropped out as possible, then rack to whiskey barrel for aging. I'll start pulling samples after about a month to check this beer's progress.

Update 10/2/2015
No real issues from this brew session other than we missed our target gravity by a bit. We were shooting for 1.100 and got 1.090. The plan was to collect about 6.25 gallons from each mash, but I turned my back for a minute during the first sparge, and we ended up collecting almost 8 gallons. So our wort was a bit more diluted than we intended. 1.090 is still pretty high gravity, so I'm not too conscerned. Everything else went well and we wrapped up the brew session in plenty of time before I headed out of town for GABF.  This one went into the barrel today, finishing out at 9% ABV.

Update 12/6/2015
I racked this into kegs today to force carb. This beer tastes amazing...malt, chocolate, vanilla, oak, roast, and of course whiskey. The barrel has done a bit of magic; I'd say this beer is ready to drink now and doesn't need to be aged to enjoy.

Update 1/10/2016
This beer was bottled yesterday. Most went into 12 ounce bottles, but my buddy Brandon was brave enough to do a bunch of bombers for his portion. I'm interested to see how it ages, but this beer is drinkable now.


Read more...

Barrel Time!

>> Tuesday, September 08, 2015

Fresh out of the shipping box
As I've indicated in a couple of my posts, I've been involved in a few barrel projects with my club. Our projects have involved full-size 55-ish gallon barrels, and while it's been a blast, I don't have enough room to store a 55 gallon barrel at my house...nor can I turn out a 55 gallon batch by myself. Well, I recently came across a sale on 10 gallon whiskey barrels from Farmhouse Brewing Supply. I decided to go ahead and pull the trigger on one.

The barrel came to Farmhouse from Old Sugar Distillery and had been used to age their sorghum whiskey, Queen Jennie. The plan is to use this barrel for a couple clean beers, then start doing some sour experiments in it as the barrel character heads toward neutral.

First up for this project was building a cradle for the barrel. Nothing too fancy here, it's just some 2x8 stock and other scrap I had in my garage. Joints were glued and screwed. Later on I'll make a dolly that the cradle will be mounted to, but I didn't have time to do that this past weekend.

With the cradle built, next I decided to wax the barrel. Depending on who you ask, this step may or may not be necessary. Smaller barrels like mine have thinner staves compared to full-size barrels. Also, the surface-to-volume ratio is higher than larger barrels. This raises two primary concerns. 

The first concern is oxidation, and this is where waxing comes into play. Because of the thinner staves and surface area, the amount of oxygen transfer is higher than a full-size barrel. Given enough time, this could result in oxidized beer. The theory is by waxing a portion of the barrel you're able to reduce the permeability of the barrel to that of a 55 gallon barrel. In the case of 10 gallon barrels, the recommendation is 75% of the staves waxed leaving the remainder of the staves and the heads un-waxed. 

The second concern is extraction rate. Because of the high surface-to-volume ratio, flavors tend to extract much faster in a smaller barrel. Long story short, it shouldn't take as long to extract oak and whiskey character from this barrel compared to a full-size barrel. The first beer in this barrel is going to be a Russian Imperial Stout and I'll probably start pulling samples after a month or so to see how things are coming along.

Fresh coat of wax before heat gun clean-up
The waxing process was pretty simple...but it was messy. If you don't want to catch grief from your significant other, do it in the garage and be sure to lay out some newspaper.

I picked up some paraffin wax from Walmart, melted it in an old tomato can immersed in simmering water, then used an old paint brush to paint it on the barrel. I used painters tape to mask off the staves that I didn't want waxed. For mine, I left the bottom 1/4 un-waxed. This process leaves a fairly thick coat of wax on the barrel, so I plan to go back over it with a heat gun to remove excess wax.

One word of caution, barrels like this contain explosive fumes from the residual distilled spirits. Use common sense. Unless you want to be picking splinters out of your spleen, I'd avoid any open flames around an empty barrel.

That's about it.  Stay tuned for updates as we run different beers through this barrel.

Update 9/9/2015
I had some time tonight so I took the heat gun to the barrel. It did a great job of removing excess wax from both the staves and the bands. Here's the barrel ready for some beer!
Post heat gun

Read more...

Petite Saison with Tart Cherries

>> Sunday, August 02, 2015

I wanted to try out the Wyeast 3031-PC Saison-Brett Blend, so today I'm brewing a Petite Saison that will get around 7 pounds of my homegrown tart cherries in the secondary. I really enjoy Saisons and other Farmhouse Ales. Usually I make my Saisons fairly high gravity, but the goal with this one is to come in a bit more session-able. The addition of the tart cherries will probably also make it somewhat kriek-like. This beer won't get any lactobacillus or pediococcus, so the only souring will come from the tart cherries.

Wyeast describes 3031 as follows:
Beer Styles: Saison, Belgian Specialty Ales, American-style Sour & Wild Beer, Strong Golden Ale
Profile: A blend of Saison yeast and Brettanomyces creates a dry and complex ale. Classic earthy and spicy farmhouse character meets tropical and stone fruit esters; aging brings elevated Brett flavor. Expect high attenuation with this blend.

Alc. Tolerance          12% ABV
Flocculation              low
Attenuation               80-90%
Temp. Range             65-80°F (18-27°C)
Based on the ferm temp range, I'd guess this is the 3711 French Saison strain blended with one of Wyeast's Brett strains.

Here's the recipe I came up with. I want this beer to finish dry, but not too thin, so I'm going with a step mash. Also adding some Chit Malt for some starch so that the brett will have something to chew on for a while. Hops-wise I'm shooting for low bitterness with a touch of flavor and aroma. I've used the Golden Naked Oats in a Saison before, and I really liked the berry/nutty character it added.

5.5# German Pils
1.25# Chit Malt
1.0# Flaked Rye
0.5# Golden Naked Oats
7g CTZ - 30 min
14g Citra - 5 min
3031 PC Saison Brett Blend
Whirlfloc
Yeast Nutrient
7.0# Tart cherries in secondary

Target O.G. 1.053

Mash
Mash at 149F for 15 min, raise to 155F for remainder of mash. I added 2.5ml of phosphoric acid to bring the mash pH to 5.39.

Fermentation
Chill to 65F, then let free-rise to 80F.

Water 
Nothing too scientific this time. I used 6 gallons of carbon filtered tap water cuht with 3 gallons of RO water. 3 gallons in the mash, sparged to 6.5 gallons pre-boil volume.

Brewing Notes
No real issues, But I did forget to take my OG before pitching yeast. I was trying to hurry and wrap things up so I could go drop off my entries for the Beehive Brew-off and totally forgot. I also decided to skip O2...just an experiment to see what happens with the brett character (some have reported more funk when the yeast are stressed).

Update 8/13/2015
Primary fermentation seemed to have finished up, so I racked onto 7# of homegrown tart cherries yesterday. Cherries had been stored in the freezer then thawed and sanitized with 1/8 teaspoon of potassium metabisulfite dissolved in 1/4 cup RO water. This sat overnight then beer was racked onto the cherries in the morning. I mashed the cherries as much as I could, but there were still some whole ones.
Update 8/26/2015
Pulled a sample today and I'm really liking this beer. The "Saison" character is really nice.  Esters are there and blend very well with the tart cherry character. There's a light spiciness that's noticeable, but subtle and very complimentary. Brett character is also there but very balanced. I'm interested to see how this changes over time. The tart cherries dropped the pH to 3.68 so it's a nice level of acidity especially since it doesn't have any lactic acid producing bacteria. I can't wait to get this in the bottle and carb'd up. This beer will definitely be in my regular rotation when I have tart cherries on hand.

Read more...